MultiPro 2000 User Manual
15
Multi-Pro is attached to or the power cord for the
Multi-Pro may be defective. Press “ESC” to return to
the previous menu or press “MENU” to return to the
main menu.
EXR”:- External (Leakage) Measurement
It is also referred to as point to point Leakage.
This function measures Leakage current between
two points on the DUT (Device under Test)
“ID”:- Device Identification Input Function.
MultiPro 2000 is capable of storing over 5000
test results in the Non- volatile memory and can
be uploaded to a PC, to save or print the records.
The
“Save”
option is available in all the
measurement Menu (refer to Measurement
Section).
This function is indended for the user for entering
a unique 4 digit number for the Device under
Test (DUT). This will enable the test data to be
stored under this unique ID number. Here is how
to enter the Device ID.
From the “MAIN MENU” select “ID” using key
F3. The display will change to “Equipment ID:
0000 as shown
Screen Shot 2
below. If a
Device ID is already entered it will show in
the menu.
