Netberg Demos R420 M2, User Manual

Page: 184 / 213

Rail Kit Assembly
173
7.2. Installing the Rails
1. Push on the latch release buttons on the end piece midpoints to open the rail latches.
Figure 7.1. Installing the Rails
2. Align the end pieces of the rails on the vertical rack flanges to seat the pegs in the bottom hole
of the first U and the top hole of the second U. Engage the back end of the rail until the latch
locks in place.
The rails can be used in both square-hole and round-hole racks.
3. Repeat steps 1 to 2 to position and seat the front end piece on the vertical flange.
To remove the rails, pull on the latch release button on the end piece midpoint and un-
seat each rail.