Netberg Demos R420 M2, User Manual

Page: 159 / 213

BIOS
148
Menu Fields Settings Comments
ror detection. They can be used as an
additional data bit.
COM0 Stop Bits Stop bits indicate the end of a serial
data packet. (A start bit indicates the
beginning). The standard setting is 1
stop bit. Communication with slow de-
vices may require more than 1 stop
bit
COM0 Flow Control Flow control can prevent data loss
from buffer overflow. When sending
data, if the receiving buffers are full, a
stop
signal can be sent to stop the da-
ta flow. Once the buffers are empty, a
start
signal can be sent to re-start the
flow. Hardware flow control uses two
wires to send start/stop signals.
COM0 VT-UTF8 Combo Key Support Enable VT-UTF8 Combination Key
Support for ANSI/VT100 terminals
COM0 Recorder Mode With this mode enabled only text will
be sent. This is to capture Terminal
data
COM0 Resolution 100x31 Enables or disables extended termi-
nal resolution
COM0 Legacy OS Redirection Reso-
lution
On Legacy OS, the Number of Rows
and Columns supported redirection
COM0 Putty Keypad Select FunctionKey and KeyPad on
Putty
COM0 Redirection After BIOS POST The Settings specify if BootLoader is
selected than Legacy console redi-
rection is disabled before booting to
Legacy OS. Default value is Always
Enable which means Legacy console
Redirection is enabled for Legacy OS.