Netberg Demos R420 M2, User Manual

Page: 84 / 213

Installing Hardware
73
3.22. HBA Card
The server supports one HBA card.
The location of the HBA card on the server is as below:
Figure 3.77. HBA Card Location
Before you remove or install the HBA card, please follow the steps below:
1. Make sure the server is not turned on or connected to AC power.
2. Remove the chassis cover. To remove the chassis cover, see Section 3.2, “Top Cover”
3. Remove the node. To remove the node, see Section 3.5.1, “Removing a Mainboard Module”
4. Disconnect all necessary cables.
3.22.1. To remove the HBA card
1. Open the locking clips that secure the HBA card.
2. Remove the HBA card out of the chassis.
Figure 3.78. Removing the HBA Card