The file is uploaded and validated. When the validation process is complete, the file name is shown
next to a green check mark.
You might lose connection to the appliance if the configuration from the JSON file
includes sections for "link_config", "networks", or both. If you are not reconnected within
1 minute, re-enter the appliance URL using one of the other IP addresses assigned to
the appliance.
The
Node name
drop down is populated with the top-level node names defined in the JSON file.
If the file is not valid, the file name is shown in red and an error message is displayed in
a yellow banner. The invalid file is not applied to the appliance. You can use
ConfigBuilder to ensure you have a valid JSON file.
4. Select a node from the list in the
Node name
drop down.
The
Apply JSON configuration
button is enabled.
5. Select
Apply JSON configuration
.
The configuration is applied to the selected node.
Automate installation and configuration of appliance nodes using configure-sga.py
script
You can use the
configure-sga.py
script to automate many of the installation and
configuration tasks for StorageGRID appliance nodes, including installing and configuring
a primary Admin Node. This script can be useful if you have a large number of appliances
92
