3. Grasp the riser assembly through the blue-marked holes and carefully lift it upwards. Move the riser
assembly toward the front of the chassis as you lift it to allow the external connectors in its installed
adapters to clear the chassis.
4. Place the riser card on a flat anti-static surface with the metal frame side down to access the adapters.
There are two adapters in the riser assembly: a Fibre Channel HBA and an Ethernet network adapter. The
Fibre Channel HBA is indicated in the illustration.
5. Open the blue adapter latch (circled) and carefully remove the Fibre Channel HBA from the riser assembly.
Rock the adapter slightly to help remove the adapter from its connector. Do not use excessive force.
6. Place the adapter on a flat anti-static surface.
After you finish
Install the replacement Fibre Channel HBA.
Related information
155
