all data from the appliance. You must
before you can install the appliance into
another StorageGRID system.
Clearing the KMS configuration deletes data from the appliance, rendering it
permanently inaccessible. This data is not recoverable.
2. When you are done checking node-encryption status, reboot the node. From the StorageGRID Appliance
Installer, select
Advanced
>
Reboot Controller
, and then select one of these options:
◦
Select
Reboot into StorageGRID
to reboot the controller with the node rejoining the grid. Select this
option if you are done working in maintenance mode and are ready to return the node to normal
operation.
◦
Select
Reboot into Maintenance Mode
to reboot the controller with the node remaining in
maintenance mode. (This option is available only when the controller is in maintenance mode.) Select
this option if there are additional maintenance operations you need to perform on the node before
rejoining the grid.
It can take up to 20 minutes for the appliance to reboot and rejoin the grid. To confirm that the reboot is
complete and that the node has rejoined the grid, go back to the Grid Manager. The
NODES
page
should display a normal status (no icon) for the appliance node, indicating that no alerts are active and
the node is connected to the grid.
167
