2. From the
Network
drop-down box, select the network you want to test: Grid, Admin, or Client.
3. Enter the IPv4 address or fully qualified domain name (FQDN) for a host on that network.
For example, you might want to ping the gateway on the network or the primary Admin Node.
4. Optionally, select the
Test MTU
check box to verify the MTU setting for the entire path through the network
to the destination.
For example, you can test the path between the appliance node and a node at a different site.
5. Click
Test Connectivity
.
If the network connection is valid, the "Ping test passed" message appears, with the ping command output
listed.
62
