1
Management port 1
Connect to the Admin network for StorageGRID.
2
Management port 2
Options:
•
Bond with management port 1 for a redundant connection to the Admin Network for
StorageGRID.
•
Leave unwired and available for temporary local access (IP 169.254.0.1).
•
During installation, use for IP configuration if DHCP-assigned IP addresses are not
available.
3
SAS interconnect port 1
4
SAS interconnect port 2
5
Fault and Active LEDs for 10-GbE network port 1
6
Fault and Active LEDs for 10-GbE network port 2
7
Fault and Active LEDs for 10-GbE network port 3
8
Fault and Active LEDs for 10-GbE network port 4
9
Needs Attention LED
10
Seven-segment display
11
10-GbE network port 1
12
10-GbE network port 2
13
10-GbE network port 3
14
10-GbE network port 4
Note:
The host interface card (HIC) on the StorageGRID appliance E5600SG controller supports
only 10-Gb Ethernet connections. It cannot be used for iSCSI connections.
8 | Hardware Installation and Maintenance Guide for SG5600 Appliances
Summary of Contents for StorageGRID SG5600 Series
Page 2: ......
