Adding the appliance to SANtricity Storage Manager
You connect the E2700 controller in the appliance to SANtricity Storage Manager and then add the
appliance as a storage array.
Before you begin
•
You are using a supported web browser.
About this task
For detailed instructions, see the SANtricity Storage Manager documentation.
Steps
1. Open a web browser, and enter the IP address as the URL for SANtricity Storage Manager:
https://E2700_Controller_IP
The login page for SANtricity Storage Manager appears.
2. On the Select Addition Method page, select Manual, and click OK.
3. Select Edit > Add Storage Array.
The Add New Storage Array - Manual page appears.
4. In the Out-of-band management box, enter one of the following values:
•
Using DHCP: The IP address assigned by the DHCP server to management port 1 on the
E2700 controller
•
Not using DHCP:
192.168.129.101
Note:
Only one of the appliance's controllers is connected to SANtricity Storage Manager, so
you only need to enter one IP address.
5. Click Add.
Configuring the hardware | 47
Summary of Contents for StorageGRID SG5600 Series
Page 2: ......
