Port bond
mode
Network bond
mode
Client Network disabled
(default)
Client Network enabled
Aggregate
LACP
(802.3ad) only
•
Ports 1-4 use a single
LACP bond for the
Grid Network.
•
A single VLAN tag
identifies Grid Network
packets.
•
Ports 1-4 use a single LACP
bond for the Grid Network
and the Client Network.
•
Two VLAN tags allow Grid
Network packets to be
segregated from Client
Network packets.
See “10-GbE port connections for the E5600SG controller” for more information about port bond
and network bond modes.
This figure shows how the two 1-GbE management ports on the E5600SG controller are bonded in
Active-Backup network bond mode for the Admin Network.
Steps
1. From the menu bar of the StorageGRID Appliance Installer, click Configure Networking > Link
Configuration.
The Network Link Configuration page appears. The first time you access this page:
•
Link Speed is set to 10GbE. This is the only link speed available for the E5600SG controller.
•
Port bond mode is set to Fixed.
•
Network bond mode for the Grid Network is set to Active-Backup.
•
The Admin Network is enabled, and the network bond mode is set to Independent.
•
The Client Network is disabled.
Configuring the hardware | 37
Summary of Contents for StorageGRID SG5600 Series
Page 2: ......
