netAlly EtherScope nXG Controlled Edition, User Manual

Page: 26 / 795

NOTE: If the AutoTest app is not currently
open, the last Wired Profile in the profile list
runs automatically when you power on the
unit or EtherScope detects a new copper link
in the top
Wired Test Port .
See Buttons and Ports for port locations and
descriptions.
Powering On
l
To start up the unit, hold down the power
button for approximately one second, until
the power button LED turns green.
l
When the display goes into Sleep mode, the
power LED remains on. Touch the power
button briefly to wake up the display. Set
the timing for display sleep and auto power
off in the
Device Settings .
l
To shut down or restart, hold the power
button for one second until the “Power off”
and "Restart" dialog box appears on the
touchscreen, and then touch
Power off or
Restart .
Introduction
26