netAlly EtherScope nXG Controlled Edition, User Manual

Page: 722 / 795

A drop-down list in the IPv4 Address dialog
shows all the Test Accessories the EtherScope
has discovered through the
discovery process ,
as well as any Test Accessories that are claimed
to the same
Link-Live organization as your
EtherScope.
NOTE: Clear the address field in the dialog
to see the full list of discovered Test
Accessory addresses.
Port
: The default iPerf3 port number is 5201.
Tap the field to enter a different port number.
NOTE: The iPerf port number entered here
must match the port number used by your
iPerf server. If needed, consult the Test
Accessory User Guide
(
NetAlly.com/products/TestAccessory ).
Duration : This setting is the length of time for
one direction, Upstream or Downstream, of the
iPerf test. If the Direction setting below is set
to both Upstream/Downstream, the total test
time is twice the value set here. Tap the field to
select a new duration or enter a custom value.
The default is 10 seconds.
iPerf Test App
722