netAlly EtherScope nXG Controlled Edition, User Manual

Page: 83 / 795

establishing link, improving compatibility with
some switches.
Charge Battery via PoE : This setting is enabled
by default. If you do not want your EtherScope
unit to charge when connected to a switch
with PoE, touch the toggle button to disable.
An AutoTest
Wired Profile must run and detect
PoE availability before the unit can use it for
charging.
See also
PoE Charging .
Receive Only : Enabling this setting prevents the
EtherScope from transmitting packets on the
Wired Test Port . You can also use the Stop After
function in Wired AutoTest Profile Settings to
hide the AutoTest cards that require transmit
capability. Set the AutoTest
Stop After setting
to Switch . Otherwise, when Receive Only is
enabled, the Wired DHCP/Static IP test shows a
Result Code of "Interface is configured to only
receive packets," and the subsequent tests do
not run.
User-Defined MAC : This setting affects the Wired
Test Port only. Tap the toggle switch to enable
a user-defined MAC address. When enabled, an
General Settings and Tools
83