netAlly EtherScope nXG Controlled Edition, User Manual

Page: 69 / 795

Test Ports
EtherScope runs Wired and Wi-Fi AutoTests,
Captures, Discovery, and comprehensive
network analyses over the test ports.
You must run an AutoTest Wired or Wi-Fi Profile
in order to establish a link on the Wired or Wi-
Fi test ports. If the AutoTest app is not
currently open, the last Wired Profile in the
profile list runs automatically when you power
on the unit or EtherScope detects a new
copper link in the top
Wired Test Port . Wired
fiber connections and Wi-Fi Profiles must be
started manually in the
AutoTest app.
NOTE: If both the top fiber and copper
ports are connected to an active network,
the EtherScope uses the fiber link as the
Wired Test Port connection.
Wired Copper Test Port
: The copper
test port is the RJ-45 port on the top of the
unit. To disable, unplug the connection.
Wired Fiber Test Port : The SFP and
fiber test port is also on the top of the unit.
To disable, unplug the connection.
General Settings and Tools
69