netAlly EtherScope nXG Controlled Edition, User Manual

Page: 674 / 795

NOTE: The UDP port number entered here
must match the port number used by your
Peer endpoint device.
Endpoint Type : Select Peer or Reflector
depending on the type of endpoint you are
using for the performance test.
Traffic Flow : This setting only appears when
Endpoint Type is set to Peer .
l
Select Upstream only or Downstream only
to test only the single traffic flow direction
specified.
l
Select Asymmetrical to test each direction
using a different Target Rate (set under
Bandwidth below). Asymmetrical is the
default traffic flow for a Peer endpoint.
l
Select Symmetrical to test both directions
using the same Target Rate.
Frame Size
Touch the Frame Size field to select a new
single frame size, the Frame Size Mix option, or
to enter a Custom Value. The default is 512
bytes.
Performance Test App
674