20
Ness SmartBell IP Intercom Installation and Users Manual.(series 2)
Version 1.5.4
Modify Registration Message
Warning:
to modify the registration information (Account, password and the server
address) must be the same as the registration information recorded on the e-GW,
otherwise it will result in registration failure.
Modify Registration Message flow chart
Existing registration information:
Account / password
Server Address of the eGateway
(eGateway’s WAN IP address)
Your routers External IP Address
Press this button to start the registration procedure.
To create or modify a new registration information (Account, password and server
address), this user will be registered to:
1. First enable pairing (registration mode) in the eGateway.
2. Registration on this device, otherwise it will result in a registration failure.
Existing registration information:
Extension / unit number as registered
into the eGateway controller. (This
must be unique for each device).
