28
Ness SmartBell IP Intercom Installation and Users Manual.(series 2)
Version 1.5.4
8. You now need to set the following:
WAN Connection type
needs to be set to
STATIC
IP address
, needs to be a IP that matches to the same network range as the customer network.
Subnet mask
needs to be the same as your customers network subnet mask
In most cases the
Default gateway
will be your routers IP address.
The Primary and Secondary DNS in most cases can be your routers IP address or if you know your
ISP DNS server enter it into these fields.
Once those settings have been set, click on the
Apply
button.
9. Remove the LAN cable from the
LAN1
port and plug it into the
WAN
port on the eGateway.
10. Change your computers IP address to match the same network range as what you entered the IP
address from step 8.
11. Open Internet Explorer and enter in the IP address you set from step 8 and login using the
username
admin
and the password
admin
.
Now the eGateway has been setup and ready for new devices to be paired and setup.
From now on, you only connect using the
WAN
port (blue port) and the IP address you set in step 8.
