23
Ness SmartBell IP Intercom Installation and Users Manual.(series 2)
Version 1.5.4
Notes on CAT5e Cable
•
Do not bend the cables to an extent where the
radius is less than 25 mm (1”). Communication
failure could result.
•
Do not remove the CAT5e cable jacket more than
necessary.
•
Arrange the color code of the RJ45 connections in
accordance with EIA/TIA-568A or 568B.
Arrange the color code of the RJ45
connections in accordance with EIA/TIA-
568A or 568B.
Be sure to check the condition of cable
connections with a LAN checker before
connecting with a LAN cable.
An RJ45 connector with a cover cannot be
connected to the port for CAT5e on IP master
stations or IP door stations. Use a cable
without a cover.
Do not pull or put excess strain on CAT5e
cables.
Use a straight-through cable for connecting
units.
Warranty
•
We warrants its products to be free from defects of material and workmanship under normal
use and service for a period of one year after delivery and will repair free of charge or replace
at no charge, should it become defective upon which examination shall disclose to be
defective and under warranty.
•
We reserve unto itself the sole right to make the final decision whether there is a defect in
materials and/or workmanship; and whether or not the product is within the warranty. This
warranty shall not apply to any product which has been subject to misuse, neglect, accident,
power surge, or to use in violation of instructions furnished, nor extended to units which have
been repaired or altered outside of the factory. This warranty does not cover batteries or
damage caused by batteries used in connection with the unit.
•
We will not be responsible for any costs incurred involving onsite service calls. We will not
provide compensation for any loss or damage incurred by the breakdown or malfunction of its
products during use, or for any consequent inconvenience or losses that may result.
