21
HOUSE MODE / ARMING MODES
House Mode can be accessed by tapping on the System status icon down the bottom of the main screen.
There are three house modes. Home, Away and Disarm.
House Mode can be used in two ways:
1. When using the scenes engine within the Z‐Wave Gateway.
When using the scenes engine you can make Z‐Wave devices behave differently when armed in the different
modes. For Example, you may only want motion sensors to turn lights on when the system is disarmed.
2. When using with a D8/D16 panel with the Z‐Wave Gateway.
When using a D8/D16, the Z‐Wave Gateway will follow these modes and will be in sync.
For Example, if you change the house mode in the Z‐Wave Gateway to ‘Away’, then the D8/D16 panel will also arm
to ‘Away Mode’. If you disarm or arm in ‘Home Mode’ using the D8/D16 panel then the Z‐Wave Gateway will also
arm in that mode.
HOTKEY CONTROL
The Hotkey control is similar to a macro or a task. This allows you to control single or multiple things by pressing
the one button. This is useful if you want to turn all devices OFF when you put the system in Away mode or turn
devices ON when you disarm the system.
The hotkey control buttons can be found from the arm/disarm screen (House Mode).
The following example will show you how to make a simple hotkey to turn on a smart switch as well as unlock a
lock.
This example is going to assume you already have a device paired to the gateway.
Summary of Contents for G1
Page 5: ...5 TYPICAL CONFIGURATION ...
