Nera SatLink 1000, User Manual

Page: 27 / 120

Nera SatLink Terminal User Guide – Revision P
25
6.2.2 Antenna and ODU parameter configuration
The Nera SatLink Terminal is normally pre-configured to be used together with the Nera SatLink 403x
Transceiver. The CLI command
odu show
will show the ODU configuration with the two parameters,
ODU transmitter type and ODU receiver type, both set to Nera SatLink 403x.
It is possible to configure the Nera SatLink Terminal to operate together with other transmitters and
receivers than SatLink 403x. The valid ODU transmitters (BUC) are listed in Table 7 and the valid ODU
receivers (LNB) are listed in Table 9 (the list is also available using the CLI help command
? odu
txtype
)
.
Choosing the ODU transmitter to be Nera SatLink 403x will automatically lock the ODU
receiver type to Nera SatLink 403x.
Please make sure that the correct ODU transmitter (BUC) type is selected according to the table below as
the return link communication will otherwise not work.
ODU
Transmitter #
(type)
ODU Transmitter (BUC) Nera Product Number
(P/N) HW Revision
Ku-band
106547 (SatLink 4036) All
106546 (SatLink 4035) All
11 Nera SatLink 403x
104804 (SatLink 4033) All
10 Nera SatLink 3000 100716 5.0 and newer
9 Nera SatLink 3000 100716 R3 or older
20 Norsat 1010XRT / 1020XRT 101338 All
30 Invacom TUL-204 104041 All
45 JRC NJT5017F All
70 NGN-9200 All
C-band
80 JRC NJT5652 105268 All
81 JRC NJT5656 105269 All
85 Norsat 3050XPTF 105271 All
90 Zinwell ZTX-C3301F 105276 All
91 Zinwell ZTX-C3701F 105274 All
Table 7: Overview of supported ODU transmitters (BUC)