Nera SatLink 1000, User Manual

Page: 28 / 120

Nera SatLink Terminal User Guide – Revision P
26
To configure use of an ODU transmitter (BUC) listed in the table above, please enter the CLI command
odu txtype <type>
where
type
is the number from the first column in the table above.
Example:
# odu txtype 10
selects the Nera SatLink 3000 transmitter. Use the command
odu show
to view the ODU configuration
parameters.
When using the Nera SatLink 3000 ODU transmitter
6
or the SatLink 4033/4035/4036 Transceiver, the
Nera SatLink Terminal must be configured with the antenna type in use in order to calculate the
transmitted EIRP correctly. The following antennas are supported:
Antenna #
(type)
Antenna (Ku-band) Size Manufacturers part no:
2 Channel Master Type 960 96 cm 62-96055-02
1 Channel Master Type 123 120cm 62-12361-02
5 Channel Master Type 184 180cm 62-18452-02
7 Channel Master Type 244 240cm 62-24356-01
6 Visiosat Tx/Rx 75cm Offset Antenna 75cm PN 104213
4 Visiosat Tx/Rx 90cm Antenna 90cm PN 105645
Table 8: Overview of supported Antenna types
The Nera SatLink Terminal is normally pre-configured to use the Channel Master 960 antenna. If another
antenna listed in the table above is to be used, please enter the CLI command
odu antenna <type>
where
type
is the antenna number from the first column in the table above.
Example:
# odu antenna 1
selects the Channel Master 120cm antenna. Use the command
odu show
to view the ODU configuration
parameters.
Example:
# odu show
Antenna Configuration
---------------------
Type Channel Master Type 960 - 96cm
Tx Gain at 14.25 GHz 41.2 dB
Transmitter (BUC) Configuration
-----------------------------------
Type Nera SatLink 4033 (14.0-14.5 GHz)
Manufacturer ID 00 60 c0
ODU Product ID 00 00 00 00 01
ODU Serial No. 1060111003050200460000
ODU HW Version 1.0
ODU SW Version 1.1
ODU SW back version 0.0
ODU Type 0
Local oscillator 13.050000 GHz
24V DC supply On
6
Not revision 3.0 or older of the SatLink 3000 transmitter