Nera SatLink 1000, User Manual

Page: 46 / 120

Nera SatLink Terminal User Guide – Revision P
44
To view the defined multicast routes use the CLI command
ip show -mcast
.
Example:
# ip show -mcast
IP Multicast Routing Table
RouteAddress AddressMask IfIndex
224.0.0.2 255.255.255.255 1
224.0.2.2 255.255.255.255 3
Please note that subnetwork internal multicast groups on the LAN will show up in the multicast route
table. LAN internal multicast traffic is e.g. generated by Windows (Network neighbourhood, etc.). Such
traffic will have the
IfIndex
set to 1.
To delete multicast routes use the CLI command
ip delroute <IP group address> <subnet mask> <ifnum>
.
Example:
# ip delroute 224.0.2.2 255.255.255.255 3
will delete the static route of the multicast group with the IP address 224.0.2.2 from the Ethernet LAN to
the satellite interface (gateway).
Enter the CLI command
save config
to save the return link multicast configuration,