Nera SatLink Terminal User Guide – Revision P
16
4.1.2 Static IP configuration of PCs connected to the Nera SatLink Terminal LAN
When the DHCP server in the SatLink Terminal is disabled, all PCs attached to the Nera SatLink
Terminal LAN must be configured with static IP addresses that are within range of the Nera SatLink
Terminal subnet (see section 6.2.1). The IP configuration parameters to use for PCs connected to the Nera
SatLink Terminal LAN are supplied from the system operator or service provider. Please configure the IP
address, Subnet mask, Default gateway, Preferred DNS server, and optionally the Alternate DNS server
as shown in Figure 14.
Note
Ensure that the actual IP addresses supplied by the system operator / service provider are
configured and not the IP addresses in the example figure.
Figure 14: Windows XP TCP/IP setting when DHCP server is disabled in the Terminal
Example:
A host may have the following configuration; IP address 192.168.0.2, Subnet mask 255.255.255.0 and
default gateway 192.168.0.1, where the IP address of the default gateway should be the IP address of the
Nera SatLink Terminal LAN interface.
Summary of Contents for SatLink 1000
