Nera SatLink 1000, User Manual

Page: 9 / 120

Nera SatLink Terminal User Guide – Revision P
7
•
JRC NJT5017F
•
NGN-9200
LNBs
•
Invacom LNB/OMT SPV - 1SM, P/N 100816
•
Zinwell ZK-VJ1, P/N 104730
•
JRC NJR2535S
•
JRC NJR2536S
•
JRC NJR2537S
•
NGN-9200
Antennas
•
Channel Master Type 960 - 0.96m Antenna, P/N 100883
•
Channel Master Type 123 - 1.2m Antenna, P/N 100882
•
Channel Master Type 184 - 1.80m Antenna, P/N 104216
•
Channel Master Type 244 – 2.40m Antenna, P/N 104612
•
Visiosat Tx/Rx 75cm Offset Antenna, P/N 104213
•
Visiosat Tx/Rx 90cm Offset Antenna, P/N 105645
C-band Equipment
BUCs
•
JRC NJT5652, P/N 105268
•
JRC NJT5656, P/N 105269
•
Norsat 3050XPTF, P/N 105271
•
Zinwell ZTX-C3301F, P/N 105276
•
Zinwell ZTX-C3701F, P/N 105274
LNB
•
Zinwell ZK-VD1, P/N 105267
•
Norsat 8000 series
Antennas
•
Channel Master Type 183 – 1.8m Rx/Tx Linear Cross Polar Feed, P/N 104905
•
Channel Master Type 243 – 2.4m Linear Cross Polar Feed, P/N 104908
•
Channel Master Type 183 – 1.8m Left Hand Circular Polarisation, P/N 104960
•
Channel Master Type 183 – 1.8m Right Hand Circular Polarisation, P/N 105281
•
Channel Master Type 243 – 2.4m Left Hand Circular Polarisation, P/N 104911
•
Channel Master Type 243 – 2.4m Right Hand Circular Polarisation, P/N 105282
1.2 Configuration tool overview
The Nera SatLink Terminal must be configured before it can communicate via the satellite to and from
the network operator Gateway. The parameters to be configured are explained in section 6.2.
The configuration of the terminal can be carried out using the configuration tools:
•
Command Line Interface
-
Via RS232/Terminal emulator (e.g. HyperTerminal)
-
Telnet
•
Web-interface
•
SNMP
Configuration via CLI and Web-interface is presented in this document. For terminal management via
SNMP, the reader is referred to [6].