NENO LEADX Ultra Manual
© NENO-CNC Schweiz 2023
Seite | 20
2.2 Y-plate
2.2.1 Y-plate and bearing block
Article Nr.
Description
Quantity
1
HGH 15 bearing blocks
2
2
Precision washer M4
16
3
M4 x 16mm screw with flat head
16
4
Y-plate left
1
Insert the M4x 16mm flat head bolts through the M4 precision washer and Y-plate on the left and
screw them onto the HGH bearing blocks as shown in the figure.
When attaching the screws to each bearing, start with the screw in the upper left corner and tighten
this screw by one turn. Now tighten the screw at the bottom left by one turn. Continue like this,
always crosswise, until all screws are fixed.
