NENO LEADX Ultra Manual
© NENO-CNC Schweiz 2023
Seite | 50
3.3.4 - Attachment of the back (fixed end)
Article Nr.
Description
Quantity
1
M5 x 8mm flat head screw
2
2
L2 angle bracket
1
Slide the T-nuts previously inserted into the lower channels of the Y-axis C-beam towards the fixed
end, then use it to fasten the profile using the M5 x 8mm flat head screws.
You can tighten the angle brackets on the C-beam. However, leave the other side of the angle on the
2040 profile still movable, this will be tightened later.
