NENO LEADX Ultra Manual
© NENO-CNC Schweiz 2023
Seite | 49
3.3.3 - Attachment of the middle sections to the Y-axis.
Article Nr.
Description
Quantity
1
M5 x 8mm flat head screw
2
2
L2 angle bracket
1
Slide the previously inserted T-nuts of the C-beam of the Y1 axis to the correct locations and attach
the L2 angle brackets of the middle sections with the M5 x 8 mm flat head screws.
Repeat the previous step for all middle sections that you want to attach to the sliding side. The
distances between the individual sections should always be the same and match those of the
reference side.
You can tighten the angle brackets on the C-beam. However, leave the other side of the angle on the
2040 profile still movable, this will be tightened later.
2x/
3x
