NENO LEADX Ultra Manual
© NENO-CNC Schweiz 2023
Seite | 102
6.0 Final work
6.1 Description
At this point of the structure, the lateral distance of the substructure is defined by the X-axis. In the
next construction phases, we will start to tighten the L2 angle brackets and Y-end plates presented in
chapter 3.0. The length of the profile of the x-axis specifies the position of the sliding side of the
substructure. The following steps will help you ensure the parallelism of the Y-axis and the
perpendicularity of your machine. At each step, we recommend placing one side of a "Right Angle"
on the profiles of the substructure before tightening, while the other side of your "Right Angle" faces
the C-Beam profiles of the Y-axis. This ensures perpendicularity between the axes.
