19
6 Ethernet Network Setup H
The antennas should be set up and configured to the specific manufacturer
requirements. The network parameters should be as follows:
a. IP address: Should be in the same IP range as the rest of the NEMTEK network
devices and all antenna should have a unique static IP. Don not use DHCP.
See section 5 of this document for further details.
b. Subnet mask: Should be in the same as the rest of the NEMTEK network
devices (recommended 255.255.255.0). See section 5 of this document for
further details.
c. Network mode (all antennas): Bridge
d. Wireless mode (antenna on FG7 side): Access point
e. Wireless mode (antenna on energizer/relay board side): Station
