50 NED
XCM
4085TLCT6
UME-0062-01
4.15 Line Fine Adjusting Correction Setting
The Line delay correction setting on 4.14 can be used for correcting the deviation of
delay between output datas of each colour at the unit of one line.
This line fine adjusting correction can be used at the unit of a half of line by the
corrective calculation.
For example, when the colour shift still generates even if
“ldly□2” and “ldly□3” of
commands are sent,
“ldlys □ 5” of command may improve the colour shift.
When the value of the command is minus (-), the correction
value of “Idly” becomes smaller.
ldly
□
2
l
dly
□
2 and ldlys
□
5
ldly
□
3
Figure 4-15-1 Line Fine Adjusting Correction
4.16 Gamma Correction Setting
Switches Gamma correction value.
Figure 4-16-1 Gamma Correction Characteristics
