22 NED
XCM
4085TLCT6
UME-0062-01
This camera uses 6-pin round shape push-pull lock type connector for the Power
Supply
1
2
3
6
5
4
Figure 3-3-4 Power Supply Connector (HIROSE: HR10G-7R-6PB)
Table 3-3-2 Pin Assignment of Power Supply Connector
No
NAME
Colour of Cable
1
DC12
–15V
White
2
DC12
–15V
Red
3
DC12
–15V
-
4
GND
Green
5
GND
Black
6
GND
-
Note: The cable colour in the table describes the compatible cable DGPSH-10.
3.4 Power Supply
The camera requires a single power supply (DC+12 to +15V).
The indicator (LED green) blinks when power is supplied. After a short period, it
changes to a constant light, indicating that the camera is operational.
Notes:
1) When selecting a power source, choose one with the capacity to allow for
inrush current. (30 W or more recommended)
2) Insert the cable plug securely until it locks into position. This is to prevent the
connector from coming loose during power transmission.
3) If the lamp fails to illuminate even after power is switched on, turn OFF power
immediately. Inspect wiring. Check the voltage and capacity of the supplied
power source.
4)
It is recommended that the shield processing of the power cable to be
connected with GND on the power supply side.
Compatible Cable (Compatible plug): DGPSH10 (HIROSE:HR10A
-7P
–6S)
Power supply voltage: DC+12
–15V (+/-5%)
Consumption Current (rated): DC+12V: 800mA
