Neco STIR-RITE III, Owner'S/Operator'S Manual, Page: 10 / 60

10
Figure 2A - Apply Bin Warning Labels
B
Danger—Flowing Grain
A
Danger—Rotating Augers
C
Danger—Electrocution Hazard
Apply Labels to the Bin Wall at
eye level. Place them on the
same side as the door latch.
Apply the “ Danger—Rotating Augers,” “Danger—Flow-
ing Grain,” and “Danger—Electrocution” labels:
•on the man hatch door, and
•on the bin wall beside the bin door, latch side (at eye
level)
Labels Applied to
Man Hatch Door:
B
Danger—Flowing Grain
A
Danger—Rotating Augers
C
Danger—Electrocution Hazard
Labels Applied
Outside Bin Door:
Apply Bin Warning Labels
Refer to Table 2 & Figure 2A:
• Two sets of Warning Labels (A, B, & C) are provided for placement on the bin.
• Make sure the surface is free of oils, dirt and moisture.
• Apply labels as shown
NOTE: If the bin has a double man-hatch door, affix the label to the inside of the outer door or to
the outside of the inner door.