NEC Xen Master, Programming Manual, Page: 29 / 536

May 2003
Programming Manual 1 - 11
A
6
-324000
-642-
02 - Re
lease 6.0
May 20
03
22 DID Digit Conversion Table & DNIS
Assignment
Not Specified Ext. No. (Up to 4 digits)
23 DID Forward Station Number for
Undefined Digit
NON NON, Ext. No.
24 PBX/CTX Access Code Assignment I 0– Up to six digits (three numeric, three
pauses)
25 PBX/CTX Access Code Assignment II 8– Up to six digits (three numeric, three
pauses)
27 Automatic Day/Night Mode Switching
Time Assignment
Not Specified Day/Night Mode Start Time (24 hours)
28 Distinctive Ringing by Telephone or CO
Selection
Tel Tel, CO
29 Private Line Assignment Not Specified CO/PBX Line Number, Tel Port Number, up
to two lines
30 Route Advance Block Assignment All Blocks 00 (Not Set) Priority of Trunk Group Number
32 Automatic Day/Night Mode by Day of
Week Selection
(Sunday ~ Saturday) =
Pattern 1 Day/Night Automatic
Switching Pattern 1, 2
33 Speed Dial Number/Name Display
Selection
Dialled Number Dialled Number, Name
34 Tie Line First Ring Pattern Selection Pattern 3 Pattern 1, Pattern 2, Pattern 3, Pattern 4,
ICM, Voice
35 Speed Dial Buffer Allocation 100 Memories 100 Memories, 1,000 Memories
37 Trunk Queuing Timeout Selection 10 sec. 10 sec., 20 sec., 30 sec., 60 sec.
46 Access Code (1-Digit) Assignment Refer to Access Code (1-Digit) Assignment on page 1-68.
47 Access Code (2-Digit) Assignment Refer to Access Code (2-Digit) Assignment on page 1-73.
48 Access Code (3-Digit) Assignment All Dial 000 (Not Used) Refer to Access Code (1-Digit) Assignment
on page 1-68.
49 Networking Trunk Group/Route
Advance Assignment
Not Specified Trunk Group 01 ~ 32 or Route Advance
Block 01 ~ 16
50 CO/PBX Outgoing Digit Add
Assignment
Not Specified 10 digits max. (On 9, *, #)
51 CO Line Ringing Pattern Selection RIng Pattern G Pattern A ~ H, Nil
52 PBX Line Ringing Pattern Selection Ring Pattern B Pattern A ~ H, Nil
53 Tie Line Delay Ring Pattern Selection Ring Pattern C Pattern A ~ H, Nil
54 Automated Attendant Transfer Ring
Pattern
Ring Pattern C Pattern A ~ H, Nil
55 DID Line Ringing Pattern Selection Ring Pattern C Pattern A ~ H, Nil
LK 1 System Mode
LK 1 CO Line (Continued)
Data
No.
Memory Block Name Default Value Programming Values