Prime Line/Hot Line Assignment
1 - 343
Programming Manual
May 2003
A6-
324000-6
42-02 -
Release 6.0
May 2003
4-23
System Mode
4
Submode
—
Data No.
23
PC Programming
a
+BTT
Prime Line/Hot Line Assignment
General Description
Use this memory block to enable user to access various features when going off-hook.
Display
Programming Procedures
1
Go off-line.
2
Press LK4 +
BC
to access the Memory Block.
3
Use dial pad to enter telephone number (10 Digits max.).
Note:
Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K
~
I
to enter numeric data
Q
+
J
to input *
Q
+
J
to input #
Default Values
Not Specified
4
Press
N
to write the data.
5
Press
P
to go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
N
1. Prime Line function enables a user to seize a specified trunk when the Multiline Terminal goes off-hook. Refer to
function codes 063 and 064 for Memory Blocks 1-1-46 Access Code (1-Digit) Assignment and 1-1-47 Access Code
(2-Digit) Assignment.
2. To call the specified station number or CO line on Hot Line, go off-hook.
3. When using Prime Line an access code (
T
+
P
)
must be entered to seize the intercom (ICM) for internal
call processing.
4. To use Hot Line Assignment, one of the following must be entered:
•
Station Number
•
Access Code + Dial Number
•
Speed Dial Access Code + Speed Dial Buffer Number.
5. Only 10 digits can be assigned.
6. Telephone ports A0~C0 are ports 100~120.
0 1 / 2 3 :
T I M E
D I S P L A Y
Data
No.
Tel Port
No.
(01~99)
A0~C0
Setting Data
