manualshive.com logo in svg

NEC Xen Master, Programming Manual, Page: 258 / 536

Share
Download
NEC Xen Master Programming Manual Download Page 258

NEC Business Solutions Ltd

Xen Master & Xen Axis

1 - 240

PRI ISDN Channel Number Selection

A6-3240

00-642-

02 - R

elea

se 6.0

May 2003

N

1. In Memory Block  1-13-00, channels are assigned in blocks of 4. Unused channels (those in excess of the number of 

channels provided by the network) must be set to NIL in Memory Block  3-91 and removed from Line Key 
assignments if necessary in Memory Block  2-06/ 4-12. These unused channels, while not available in the system, 
consume trunk ports and so limit the number of trunks available in the system.

Memory Block  1-13-05 must then be programmed to show the exact number of channels which are 
available.

2. The 

Xen Axis

 can accommodate a maximum of 1 PRT(1)-U13 ETU with 16 channels.  Channels provided by the 

network in excess of 16 will not be available in the system.

3. The 

Xen Master

 can accommodate a maximum of 2 PRT(1)-U13 ETUs providing a total of 60 channels.

4. A PRT(1)-U13 ETU must be assigned in the system to set this Memory Block.

eg.

With a PRI(10) installed, select LK3=12 
channels.

Assign trunks 11 and 12 as NIL in Memory Block  3-91.
Maximum number of trunks is now limited to 14.

eg.

With a PRI(10) installed, select LK3=12 
channels.

Assign trunks 11 and 12 as NIL in Memory Block  3-91.
Maximum number of trunks is now limited to 62.

eg.

With a PRI(20) installed, select LK5=20 
channels.

eg.

With a PRI(30) installed, select LK8=32 
channels.  

Assign trunks 31 and 32 as NIL in Memory Block  3-91.
Maximum number of trunks is now limited to 60.

Summary of Contents for Xen Master

























































































































































































































































































































































































































































































































































Reviews:

No comments