NEC Xen Master Programming Manual Download Page 530

Page: 530 / 536

NEC Business Solutions Pty Ltd

Xen Master & Xen Axis

1 - 512

PC Programming

A6-3240

00-642-

02 - R

elea

se 5.0

May 2003

CO/PBX Trunks

This option allows technicians to program system data related to trunk
assignments.

Three selections are available with this option:

System Wide

Trunk Base

Timers

Intercom

This option allows the technician to program system data related to intercom
assignments

DISA

This option allows the technician to assign codes for Direct Inward System Access
(DISA).

Paging

This option allows data related to paging assignments to be programmed.

Access Codes

This option allows the technician to enter Access Codes. Where appropriate,
Access Codes are set to default system values.

Speed Dialling

This option allows data related to system and station speed dialling to be
programmed.

System Timers

This option allows system-wide timers to be assigned.

Tenants

This option allows data related to tenant assignments to be programmed.

Call Arrival Keys

This option allows Call Arrival block assignments to be programmed.

Forced Account Codes

This option allows the technician to program the account code length and to assign
account codes.

Application

The Application pulldown menu allows access to system data items relating to
advanced system applications.

Summary of Contents for Xen Master

























































































































































































































































































































































































































































































































































Search results

Summary of Contents for Xen Master

Reviews:

NEC Xen Master, Programming Manual, Page: 530 / 536

Search results

Summary of Contents for Xen Master

Reviews: