PBX/CTX Access Code Assignment I
1 - 53
Programming Manual
May 2003
A6-
324000-6
42-02 -
Release 6.0
May 2003
1-1-24
System Mode
1
Submode
1
Data No.
24
PC Programming
a
+BA
PBX/CTX Access Code Assignment I
General Description
Use this Memory Block to specify a PBX line PBX/CTX Access Code together with pauses
for outgoing calls.
Display
Programming Procedures
1
Go off-line.
2
Press LK1 +
LK1 +
BD
to access the Memory Block.
3
Enter the data using the dial pad.
Note:
Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K
~
I
to enter numeric data
Q
to insert a pause
U
to clear all data
Default Values
0-
4
Press
N
to write the data.
5
Press
P
to go back on-line.
Related Programming
M.B. Number
Memory Block Name
N
1. Features such as Code Restriction do not operate properly unless a PBX/CTX Access Code is specified. This
limitation applies to PBX lines assigned in Memory Block 3-90 Trunk Type Selection.
2. A pause is not inserted in the number of an outgoing call on a CO line.
3. Up to three numeric characters and three pauses can be specified.
4. A pause cannot be inserted as the first digit or as consecutive digits.
5. A -(dash) is the entry for pause.
2 4 : P B X
A C
0
T I M E
D I S P L A Y
Data
No.
Title
Setting
Data
Example:
Xen
System
Xen System
Intercom Line
PBX Line
PBX
CO Line