NEC VERSA FXI, Service And Reference Manual

Page: 54 / 101

Disassembly and Reassembly 3-11
Mini-PCI LAN
Use the following procedure to remove the mini-PCI LAN (if installed).
1.
Remove the keyboard, front cover assembly, and top cover assembly from the system.
2. Disconnect the mini-PCI LAN from connector P27 on the main board
3.
Locate and remove the two screws securing the mini-PCI LAN.
Removing the mini-PCI LAN
A – Screw B – Mini-PCI LAN
4.
Remove the mini-PCI LAN from the system.
PC Card Assembly
Use the following procedure to remove the PC card assembly.
1. Remove the keyboard, front cover assembly, and top cover assembly from the system.
2.
The PC card assembly is located in the left-side bay under the front cover. Remove the PC
card assembly as follows:
„
Remove the four screws securing the assembly to the system.
„
Pull up the assembly to disconnect it from the I/O board (the PC card assembly’s board
sits directly above the I/O board connector).
„
Lift the assembly out of the system.