NEC VERSA FXI, Service And Reference Manual

Page: 49 / 101

3-6 Disassembly and Reassembly
Keyboard
Use the following steps to remove the keyboard assembly.
1.
Make sure that the system is powered off and that no peripheral devices are attached.
2. Open the LCD panel.
3.
Locate the three keyboard locking tabs: one on the upper left of the keyboard, one above the
F8 key, and the other on the upper right of the keyboard.
Locating the keyboard locking tabs
A – Locking Tab
4.
Using a small flat-head screwdriver, release the locking tabs by pushing them toward the
back of the system. (Release the locking tabs in the direction of the cable.)
5. With the tabs released, carefully lift the keyboard assembly out of the system. Disconnect
the keyboard cable from connector P8 on the main board.
Note
Remove the keyboard assembly, as directed here, before you attempt to remove any of
the assemblies in the subsequent topics.