NEC VERSA FXI, Service And Reference Manual

Page: 39 / 101

2-20 System Configuration and Setup
Enabling the BIOS Flash Switch
Before performing the BIOS update, be sure to enable BIOS flash switch. Set switch 5 to “ON”
before performing the BIOS update.
Follow these steps to enable the BIOS flash switch.
1. Make sure the system is powered off and that no peripheral devices are attached.
2.
Turn over the system and locate the memory module bay.
Locating the memory module bay
A – Memory Module Bay Cover B – Screw
3.
Remove the screw and bay cover.
4.
Locate the dip switch block. Using a fine-tipped object, change switch 5 to “ON” to enable
BIOS flash.
Never use a pencil to change switch settings. Residue from the pencil
can damage the system.