NEC VERSA FXI, Service And Reference Manual

Page: 41 / 101

2-22 System Configuration and Setup
Power off your computer. The next time you power on your computer, you will have the
latest NEC Versa FXi computer BIOS revision level.
8.
Enter Setup to restore the default parameter settings.
9.
Be sure to modify any custom settings that you may have configured.
10. Disable the BIOS flash switch. Change switch 5 back to “OFF” after completing the BIOS
update. For details about enabling and disabling the BIOS flash switch, see the section
earlier in this chapter, “Enabling the BIOS Flash Switch.”
NEC Utilities
NEC Computers provides several programs and routines designed to make your NEC Versa run
more efficiently.
The NEC utilities include:
„
NEC Customize Utility
„
HDPREPEZ Utility
NEC Customize Utility
The NEC Customize utility gives you the option to install or launch:
„
Application and Driver CD — Use this option to install a variety of software
applications, drivers, utilities, internet browsers, and the NEC Info Center.
„
NEC Versa FXi Warm Connect Utility — Use this option to take advantage of warm
connecting the CD-ROM drive to your NEC Versa FXi computer.
NEC Customize Utility Screen
The NEC Customize utility screen consists of the following.
„
A window at the top half of the screen lists the available options.
„
The window below the options list displays a description of each option when the option
is highlighted.
„
The Launch button initiates a selected option when clicked.
„
The More Info button provides an overview of the NEC Customize utility.
„
The Exit button closes the NEC Customize utility.
Using the NEC Customize Utility
Follow these steps to use the NEC Customize utility.
1. Double click the NEC Customize icon.
2.
From the display window, select the desired option.
3. Click Launch or Install to initiate the selected option.
4.
Follow the on-screen instructions to process the selected option.
For some of the selected options you are prompted to reboot your system.
5.
If necessary, click Exit to close the NEC Customize dialog box.