NEC VERSA FXI, Service And Reference Manual

Page: 43 / 101

2-24 System Configuration and Setup
Launching the Application and Driver CD with Windows 2000
Follow these procedures to launch the Application and Driver CD using NEC Customize with
Windows 2000.
1.
Insert the Application and Driver CD into the CD-ROM drive.
2.
Double click the NEC Customize icon, if necessary.
3. Select Application and Driver CD.
4.
Click Install to launch the CD.
The Application and Driver CD dialog box appears.
Launching the Application and Driver CD with Windows 98
Follow these procedures to launch the Application and Driver CD using NEC Customize with
Windows 98.
1.
Insert the Application and Driver CD into the CD-ROM drive.
2. Double click the NEC Customize icon, if necessary.
3.
Highlight Launch Application and Driver CD.
4. Click Launch.
The Application and Driver CD dialog box appears.
Application and Driver CD Dialog Box
The Application and Driver CD dialog box consists of the following components.
„
Selection Tabs — Located just below the title bar, each tab represents a software
category. The selection tabs include applications, drivers, utilities, internet browsers,
and the NEC Online Documentation.
„
Description — Located in the bottom portion of the dialog box, the text describes the
selected or highlighted software category or application, driver, etc.
„
Install — Clicking the Install button installs the selected software.
„
Exit — Clicking the Exit button closes the Application and Driver CD dialog box.
Installing the Application and Driver CD Software
Once the Application and Driver CD dialog box appears, follow these steps to install the desired
software.
1.
Click the selection tab of your choice.
2. Click the desired application, driver, or utility.
3.
Click the Install button to install your selection.
Follow the on-screen instructions to install your selection.
4.
Click Exit to close the Application and Driver CD dialog box.
5. Remove the CD from the CD-ROM drive when the installation is complete.