NEC VERSA 4000 BATTERY CHARGER WITH AC ADAPTER Manual Download

Page: 70 / 140

4-12 Adding Options

Removal

Follow these steps to remove an industry standard, 8- or 16-
bit expansion board from the docking station.

Prepare for board removal as follows:

Disconnect and remove the NEC Versa from the
docking station.

Turn off and unplug the docking station.

Disconnect any peripheral devices connected to the
docking station.

Remove the docking station cover. See “Cover Re-
moval” earlier in this section for information on re-
moving the cover.

Position the docking station so you have access to the
side where the expansion slots are located.

CAUTION

Be careful not to drop anything into the docking sta-
tion. Doing so can damage the unit.

Summary of Contents for VERSA 4000 BATTERY CHARGER WITH AC ADAPTER













































































































































Search results

Summary of Contents for VERSA 4000 BATTERY CHARGER WITH AC ADAPTER

Reviews:

Related manuals for VERSA 4000 BATTERY CHARGER WITH AC ADAPTER

Brands by name

Popular brands

NEC VERSA 4000 BATTERY CHARGER WITH AC ADAPTER, Manual

Search results

Summary of Contents for VERSA 4000 BATTERY CHARGER WITH AC ADAPTER

Reviews:

Related manuals for VERSA 4000 BATTERY CHARGER WITH AC ADAPTER

Brands by name

Popular brands