NEC VERSA 4000 BATTERY CHARGER WITH AC ADAPTER Manual Download

Page: 77 / 140

Adding Options 4-19

Securing the drive

Attaching the Cables

Attach drive cables as follows.

When connecting cables, align the cable con-

nector with the drive connector and position the red
edge of the cable as shown in the figures.

Taking care not to bend any pins, press the cable
connector firmly onto the pins.

Place the drive cage close to the docking station for easy
access to the connectors on the docking station interface
board.

Look in the package of cables that came with the dock-
ing station and locate drive power cable.

Summary of Contents for VERSA 4000 BATTERY CHARGER WITH AC ADAPTER













































































































































Search results

Summary of Contents for VERSA 4000 BATTERY CHARGER WITH AC ADAPTER

Reviews:

Related manuals for VERSA 4000 BATTERY CHARGER WITH AC ADAPTER

Brands by name

Popular brands

NEC VERSA 4000 BATTERY CHARGER WITH AC ADAPTER, Manual

Search results

Summary of Contents for VERSA 4000 BATTERY CHARGER WITH AC ADAPTER

Reviews:

Related manuals for VERSA 4000 BATTERY CHARGER WITH AC ADAPTER

Brands by name

Popular brands