manualshive.com logo in svg

NEC VERSA 4000 BATTERY CHARGER WITH AC ADAPTER, Manual

Share
Download
NEC VERSA 4000 BATTERY CHARGER WITH AC ADAPTER Manual Download Page 42

 

  

 3-6   Setting Up and Using the Software

 

If you did not follow these instructions, click
“Exit.” Go back to the beginning of this section,
“Docking Station 4000 Setup Utility,” and start
over.

9. 

When prompted, select installation operations in the
following order.

n

 

Driver installation

 

Click the “Driver Installation” button.

 

Select “Automatic Board Configuration” at the
prompt

 

Click the “Install Software” button to install the
audio software at the next prompt.

n

 

Software installation

 

Press 

Enter

 or click “OK” to accept the default

directory PCAUDIO for loading the audio soft-
ware.

 

Press 

Enter

 again to create the directory.

 

Choose “Complete Installation” for the type of
installation to follow.

 

At the prompt, insert Audio Applications
diskette 2 into the drive and press 

Enter

.

10. 

Click “Restart Windows” to reboot Windows. (You
may need to perform a cold boot.)

11. 

See “Docking Station 4000 Setup Software” for infor-
mation about using Docking Station 4000 software.

Summary of Contents for VERSA 4000 BATTERY CHARGER WITH AC ADAPTER













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands