Docking/Undocking the NEC Versa 2-11
UNDOCKING THE NEC VERSA
NEC recommends that you power down your NEC Versa
before undocking.
n
For standard undocking procedures, follow the instruc-
tions in “Normal Undocking.”
n
If power to the docking station is interrupted unexpect-
edly, follow the instructions in “Emergency Undocking.”
You may need this procedure in case of a power failure
or motor jam.
Normal Undocking
Undock your NEC Versa as follows.
1.
Check the status of your NEC Versa power:
n
If you have an NEC Versa 4000 with Windows 95,
put your system into Suspend mode or turn off sys-
tem power before undocking.
n
If you have an UltraLite Versa, NEC Versa E, NEC
Versa M, NEC Versa P, or NEC Versa V, turn com-
puter power off before undocking.
To power off the NEC Versa, press the power button on
the front panel of the docking station.
2.
For easier undocking, close the LCD panel.(This is not
required, but is recommended.) If using software un-
docking, do not close the panel.
