NEC VERSA 4000 BATTERY CHARGER WITH AC ADAPTER Manual Download

Page: 117 / 140

5-12 Connecting Peripheral Devices

Securing the Cables

Connect the power cable to the optional device.

Reconnect any options that you disconnected. Turn on
the device and the docking station.

External SCSI Devices

Attach external SCSI devices as follows:

Check that the SCSI device is set up properly. See the
documentation that came with the device to verify switch
and jumper settings.

Turn off and unplug the docking station and any external
devices connected to it.

Locate the external SCSI connector on the back of the
docking station.

Squeeze the tabs on the side of the SCSI cable connector
and attach the SCSI cable to the back of the docking
station.

Connect the other end of the cable to the device.

Summary of Contents for VERSA 4000 BATTERY CHARGER WITH AC ADAPTER













































































































































Search results

Summary of Contents for VERSA 4000 BATTERY CHARGER WITH AC ADAPTER

Reviews:

Related manuals for VERSA 4000 BATTERY CHARGER WITH AC ADAPTER

Brands by name

Popular brands

NEC VERSA 4000 BATTERY CHARGER WITH AC ADAPTER, Manual

Search results

Summary of Contents for VERSA 4000 BATTERY CHARGER WITH AC ADAPTER

Reviews:

Related manuals for VERSA 4000 BATTERY CHARGER WITH AC ADAPTER

Brands by name

Popular brands