Page 20 - NEC Versa Quick Start Guide
Using the Recovery Program
E
ngl
is
h
If you are restoring from the Master CD you created:
1. Insert the Master CD 1 into its drive.
2. Turn the system OFF.
3. Turn the system back ON.
If you are restoring from the network:
1. Turn the system OFF.
2. Insert the network recovery boot floppy you created.
3. Turn the system back ON.
After a while, a warning message appears. Please read it carefully. Press O (Ok) to con-
tinue or N (CaNcel) to exit the Recovery Program.
Using the Recovery Program
In the Recovery Program main menu, you have the choice between the following
options:
1. Standard System Restore
This option allows you to reset your system to its original factory settings.
2. Advanced Options
Go to the advanced options if you want to install Windows.
3. Tools
The Tools menu includes an access to the MS-DOS edit mode and a hard disk utility.
4. Cancel to return to DOS.
Closes the Recovery Program and exits to DOS mode.
Standard System Restore
The Standard System Restore option of the Recovery Program resets your system to
the original factory settings. All the files that were on the drive when you purchased
your system will be restored. All the files you have added or created yourself and all
changes made to the original files will be lost after the recovery process! Your hard disk
will be exactly the same as when it left the factory. (Note that if you are restoring from
a Master CD or a network, the complete system will be restored, except the backup
partition.)
CAUTION: before you begin the restoration process, do not forget to backup
your valuable files (documents, pictures ...) on removable disks, such as dis-
kettes or writable CDs.
N22_01_QSG.book Page 20 Thursday, November 14, 2002 10:22 AM
