manualshive.com logo in svg

NEC Versa 2730M, User Manual, Page: 68 / 116

Share
Download
NEC Versa 2730M User Manual Download Page 68

Mini-PCI Slot 

Your notebook computer features a Mini-PCI slot which supports the installation of an additional expansion
card. 

Note

: if your notebook features Wireless LAN capabilities, this slot cover is not available; it is already fitted 

with the Wireless LAN expansion card. 

Installing a Mini-PCI Card 

Removing a Mini-PCI Card 

1. Power off the system and disconnect the AC power cord from the wall and the system. 

Disconnect any other external devices. 

2. On the bottom of the Versa, remove the 

screw 

(A)

 securing the Memory & Mini-

PCI Bay cover. 

3. Lift the bay cover and set it aside. 

Note

: you may need to use the tip of a small knife 

to pop up the slot cover. Gently insert the blade 
under the screw hole, and slide the blade outwards 
to the left until the tab is released. Repeat this 
operation sliding the blade to the right to release 
the second tab. 

4. Align the notch on the expansion card 

with the notch in the slot connector and 
install the card as follows: 

Hold the card at a 60-degree angle 
and align its connector with the slot 
in the system. Push the connector 
firmly into the slot. 

Press down on the edge of the 
card opposite to the connector until 
the locking tabs on the sides snap 
into place, securing the card. 

5. Replace the Memory & Mini-PCI Bay cover, making sure the three tabs on the back edge are 

lined up in their respective slots, and press on the two tabs located on each side of the screw 
hole in order to secure the cover. 

6. Secure the screw that was removed during step 2. 

1. Power off the system and disconnect the AC power cord from the wall and the system. 

Disconnect any other external devices. 

2. On the bottom of the Versa, remove the 

screw 

(A)

 securing the Memory & Mini-

PCI Bay cover. 

3. Lift the bay cover and set it aside. 

Note

: you may need to use the tip of a small knife 

to pop up the slot cover. Gently insert the blade 
under the screw hole, and slide the blade outwards 
to the left until the tab is released. Repeat this 

Mini-PCI Slot

Summary of Contents for Versa 2730M





















































































































Reviews:

No comments